Concrete batching
Your current location: 首 页 > Product center > Simple mixing plant

Mixing plant

2020-05-08 14:59:18
Mixing plant
Detailed introduction:

Continuous type

Most of them are on the marketBatch mixing station目。Its technological process is: the first match is not greater than the productionagitatorMixing capacity of raw materials, then put into the blender to stir。It's mixed before it's unloaded into the truck。

First, the process

Characteristics of mixing plant

1) After the start of production, the raw materials start the uniform batching process according to the distance from the mixer inlet, and reach the mixing cylinder simultaneously;

2) Each material enters the mixer evenly according to the proportion;

3) The mixer will push the material forward while rotating mixing, and the material will become the finished product from the beginning of mixing/pushing from the import to the export。

4) After the production to the pre-set quantity, the materials are stopped in sequence according to the distance from the mixer inlet。

5) From the start of production to the end of production, batching, mixing/pushing, and discharging are carried out continuously。

二、Characteristics of mixing plant

1) The host works smoothly: raw materials enter the mixer evenly over a relatively long period of time。No intermittent burst feeding process。

2) Smooth loading of finished products: the concrete is uniformly loaded into the car for a long period of time, without intermittent sudden unloading process。

3) Less space occupation: reduce the large finished product bucket and aggregate storage bucket, low height, small footprint。

4) Low wear of wear-resistant parts: smooth mixing without impact, while stirring less。

5) Low energy consumption: small installed power, while stirring less, a small amount of raw materials evenly into the blender and easy to mix evenly。

6) Low use and maintenance costs: fewer structural links, short belts, stable work。


Next post:Mixing plant2020-05-08

Recent visit: